Back to top
+918068092901
    Paypal Trust Stamp
    Product Showcase
    Home » Products » Others » Semiconductors Component Checker And Curve Tracer

    Semiconductors Component Checker And Curve Tracer

    Semiconductors Component Checker And Curve Tracer
    Semiconductors Component Checker And Curve Tracer
    Send Inquiry
    Product Code : 16950
    Brand Name : Tesca
    Price And Quantity
    • Minimum Order Quantity
    • 1
    • Unit of Measure
    • Piece/Pieces
    • Price Range
    • 3000.00 - 15000.00 INR
    Product Specifications
    • Material
    • Plastic
    • Dimensions
    • 412 x 150 x 310 Millimeter (mm)
    • Shape
    • Rectangle
    • Color
    • Black
    Product Description

    Semiconductors Component Checker And Curve Tracer

    16950 Semiconductor component checker & curve tracer are useful for checking & tracing the characteristics curve of a variety of components in a very short time duration. The Instrument consist of five different sections, detail Specifications & features are following :

    SECTION - 1. DIODE CHECKER :-

    SPECIFICATIONS :

    01. Indicates whether diode is open circuit, short circuit & if working, its polarity.
    02. Silicon & germanium, both types of diodes can be tested.

    FEATURES :

    Two LED's & One test switch are provided showing :

    01. Open diode - If both LED's are OFF.
    02. Short diode - If both LED's are ON.
    03. Good diode - If one glows fully & other dim.

    SECTION - 2. TRANSISTOR CHECKER :-

    SPECIFICATIONS :

    01. For good transistor LED marked GOOD will glow.
    02. For bad transistor LED marked BAD will glow..

    FEATURES :

    01. One transistor socket and three sockets are provided.
    02. A switch decides NPN or PNP transistor.
    03. Good transistor - If one glows fully & other dim.

    SECTION - 3. FET CHECKER :-

    SPECIFICATIONS :

    01. For GOOD FET, the meter needle vibrates continuously between a maximum position to a minimum position. .
    02. For BAD FET, either there is no response in the meter or it holds at one point.

    FEATURES :

    01. One transistor socket and three sockets are provided.
    02. An ammeter of 1 MA range is provided .
    03. Designed to test almost all FET's.

    SECTION - 4. TRANSISTOR PARAMETER CHECKER :-

    SPECIFICATIONS :

    TRANSISTOR TESTER TESTS I LEAKAGE AND GAIN CBO' AT TWO RANGES LOWAND HIGH.

    • Icbo TEST : 0 to 15 mA on LOW range. 0 to 50mA on HIGH range.
    • LEAKAGE TEST : 0 to 500 mA on LOW range. 0 to 1500mA on HIGH range.
    • GAIN TEST : 0 to 50 mA on LOW range. 0 to 150mA on HIGH range for values of base current i.e. 300, 150, 50, and 25mA.

    FEATURES :

    01. Big 115 mm X 55 mm ( 4.5" X 2.25") dial of meter increases the accuracy of readings.
    02. Four values of base current are provided for gain measurement so that gain can be compared under four conditions.
    03. A six position selector switch selects gain at 300, 150, 50, and 25mA base current, leakage and I currents. CBO
    04. Another switch selects HIGH and LOW rangs.
    05. A transistor socket is provided for transistors with short leads, and three sockets for any other.
    06. A PNP - NPN switch selects PNP or NPN transistor to be checked.

    SECTION - 5. CURVE TRACER :-

    SPECIFICATIONS :

    Semiconductor Device range:

    01. Bipolar Transistor (NPN & PNP)
    02. FET (Juction N & PType)
    03. SCR
    04. UJT (N-Channel)
    05. ZENER DIODE (Up to 50VVz)
    06. GERMANIUM & SILICON DIODES
    07. LED

    FEATURES :

    01. Full protection of semi- conductor devices.
    02. Full protection of internal circuitry.
    03. Selection of Forward or Reverse characteristics for Zener diodes, diodes & LED by a switch.
    04. Ease of operation due to minimum number of panel settings.

    COMMON FEATURES : -

    • For connecting devices two Nos. of 3 test cables are provided.
    • Power Requirement : 230 V ± 10% at 50 Hz A.C. mains.
    • Strongly supported by detailed operating instractions.
    • Weight : 4 Kg. (Approx)
    • Dimension : W 340 x H 110 x D 210 .

    OTHER APPARATUS REQUIRED :

    • Cathod Ray Oscilloscape
    Trade Information
    • Payment Terms
    • Telegraphic Transfer (T/T)
    • Supply Ability
    • 100 Piece Per Month
    • Delivery Time
    • 4-5 Week
    • Sample Available
    • Yes
    • Sample Policy
    • Sample costs shipping and taxes has to be paid by the buyer
    • Main Export Market(s)
    • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia

    TESCA TECHNOLOGIES PVT. LTD.
    X