Cookie Img
Back to top
Paypal Trust Stamp
Product Showcase
Home » Products » Embedded / Microprocessor Trainers » Peripheral Study Cards

Peripheral Study Cards

Peripheral Study Cards
Peripheral Study Cards
Product Code : 43275-43284
Brand Name : Tesca
Product Description

Study Cards can be connected to the 50 Pins KXT Bus of any 8/16 bit Series Microprocessor Trainer Kits. In this Study Card LED's are provided for different signals like Read, Write, Address Lines,Data Lines, Chip Select & Ports depending upon the Peripherals.
Study

43275 - 8255 (PPI) STUDY CARD

  • 24 bit I/O using 8255 Programmable Peripheral IC
  • All Input/Output ports pins are terminated on 3 eight pin terminals & 26 pin FRC Connector        
  • All Input/Output ports are indicated by 3 mm LEDs
  • Data lines from AD0 to AD7 are indicated by 3mm LEDs
  • Chip Select, A0, A1, Read, Write are indicated by 3mm LEDs
  • Hardware Single Step and Full Clock Execution mode are provided
  • Single stepping can be performed using micro switch provided on board
  • Using this study card all MODE experiment can be performed
  • Interface 8085/8086 Kit using 50 pin FRC Connector
  • User's Manual with Sample Programs


43276 - 8253 (PTC) STUDY CARD

  • Three channel Timer/Counter using 8253 Programmable Timer Counter IC
  • All Input/Output ports pins are terminated on terminals & 10 pin FRC Connector
  • Clock for Counter-0 is internally provided
  • Data lines from AD0 to AD7 are indicated by 3mm LEDs
  • Chip Select, A0, A1, Read, Write are indicated by 3mm LEDs
  • Hardware Single Step and Full Clock Execution modes are provided
  • Single stepping can be performed using micro switch provided on board
  • Card are supplied in Australian Pine Wood Enclosure
  • Using this study card all MODE experiment can be performed
  • Interface 8085/8086 Kit using 50 pin FRC Connector
  • User's Manual with Sample Programs


43277 - 8155 (PPI WITH TIMER) STUDY CARD

  • 22 bit I/O with single channel timer using 8155 Programmable Peripherals IC
  • All Input/Output ports pins are terminated on 3 eight pin terminals & 26 pin FRC Connector
  • All Input/Output ports are indicated by 3 mm LEDs
  • Data lines from AD0 to AD7 are indicated by 3mm LEDs
  • Chip Select, IO, Memory, Read, Write are indicated by 3mm LEDs
  • Hardware Single Step and Full Clock Execution modes are provided
  • Single stepping can be performed using micro switch provided on board
  • Using this study card all MODE experiment can be performed
  • Interface 8085/8086 Kit using 50 pin FRC Connector
  • User's Manual with Sample Programs
Many More

TESCA TECHNOLOGIES PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.