Back to top
Paypal Trust Stamp
Product Showcase
Home » Products » Embedded / Microprocessor Trainers » 8086 Microprocessor Trainer Kit (LED)

8086 Microprocessor Trainer Kit (LED)

8086 Microprocessor Trainer Kit (LED)
8086 Microprocessor Trainer Kit (LED)
Send Inquiry
Product Code : 43211
Brand Name : Tesca
Product Description

43211 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control.This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface.Features.


  • 6K Bytes of EPROM with 16K bytes of Battery Backup RAM
  • 72 I/O Lines, Three Channel Timer/Counter, PC Serial Interface using USART, Interrupt Controller    
  • Seven Segment Display with 28 Keys Hex Keypad   
  • Power-full Command like Single Stepping, Break Point, Full Clock Execution,  Examine Memory/ Register
  • Uploading & Downloading to and from PC in Windows98/XP/NT
  • In-Built Power Supply                                    

  • 8086/8088 CPU operating at 2.5/5MHz                               
  • 8086 Processor can be replaced by 8088 Processor            
  • On-board sockets provided to facilitate the use of 8087 Coprocessorand 8089 I/O Processor
  • 16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB   
  • 16K bytes of powerful monitor EPROM using two nos. of 27512
  • 72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC Connector to  interface with IC-XX Series  
  • 16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector
  • RS-232C interface using 8251 brought out at 9 Pins DType Connector. On-board Interrupt controller using 8259 brought out at 20 Pins FRC Connector
  • 28 keys hexadecimal keyboard and eight seven segment display using 8279
  • Two modes of operation:
    -Keyboard Mode
    -Serial Mode      
  • Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode 
  • Facility for Downloading/Uploading files from/to PC 
  • All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series
  • All ICS are mounted on IC Sockets.    
  • Bare board Tested Glass Epoxy SMOBC PCB is used
  • In-Built Power Supply of +5V/2A, ±12V/250mA
  • Attractive Wooden enclosures of Light weight Australian Pine Wood
  • User's Manual with sample programs
  • 290mm x 210mm x 105mm (L x W x H)
  • Weight 3 Kgs

  •  PRINTER INTERFACE to interface with DOT MATRIX Printer
  •  On-board EPROM Programmer for 2732/2764/27256